Oil Tank Making Fin Forming Machine for Small Transformer

Basic Info

Model NO.	BWD-1300
Mould Life	300,000-1,000,000 Shots
Name	Transformer Corrugated Fin Forming Machine
After-Sales Service	Available Engineer Service Overseas
Material Width	300-1300mm
Material Thickness	0.5-1.5mm
Corrugation Height	50-400mm
Corrugation Pitches	45mm
Feeder Speed	0-28m/Min
Transport Package	Sea Shipping
Specification	20GP container
Trademark	SENERGE
Origin	Zhejiang, China
Production Capacity	1 Unit/Month

Product Description

Electrical Power Transformer Tank Fin Forming Machine

1.General Description

1) Special machine for transformer fuel tank.

2) Include loading trolley, main machine, hydraulic station and electric control box etc.

3) Has reasonable structure and operation easily.

4) The hydraulic system is automatic controlled and running stable.

5) May complete such as forming, shearing, bending etc process within one time when you put all operation parameters at screen.

6) The main technical parameter

2.Main technical parameter

1.Machining range
Material width B	300-1300mm
material thickness S	0.5-1.5mm
corrugation height H	50-400mm
corrugation pitches t	≥45mm
net clearance between corrugation e	6mm
number of corrugation panel sets n	1-4 sets
corrugation panel length L	≤2000mm
bend height c 25mm(or as per customer requirements)	25mm(or as per customer requirements)
corrugation panel fore-end a	≥25mm
corrugation panel rear-end b	≥25mm
feeder speed 0-28m/min	0-28m/min
molding speed	30-25s/wave
shear burr	≤0.3mm
system rate pressure	10MPa
system maximum pressure	12MPa
electric power AC 3 phase 4 wires	380V/50HZ(or as per customer requirements)
total electric power	18KW
machine demension	2200mmX3000mmX11000m
2. Loading trolly
loading weight	max 5000 kg(normalconfiguration,can be meet as customer requirements)
go up and down stroke	max 350mm
table width	540x1300 mm
go up and down speed	50mm/min
3..Decoiler
Loading weight	max 5000 kg((normalconfiguration, as customer requirements)
Inner diameter	500 mm
Outer diameter	1000 mm
Width	300-1300 mm(the outer diameter should be less than 930mm when width of roll material is bigger than 1000mm )
Decoiling speed	0-28m/min
Decoiler barrel diameter	450-520 mm
4. Feeder system
Servo motor	2 kw
Encode	1000 lines
Feeder speed	0-28m/min
Feeder roller diameter	114 mm
Feeder roller width	1400 mm
Measure roller diameter	100 mm
5. Front mould assy
Demension	1300x410x36 mm
Front and rear mould distance	≤850 mm
Front mould uplift height	20 mm
6. Rear mould assy
Rear mould board dimension	1470x500x36 mm
Rear mould board uplift height	410 mm
7.Shearing and bending assy
Scissors length	1400 mm
Shear stroke	420 mm
8.Work table
Dimension	1400x2000mm