Magnetic Artificial Gemstone Diamond Sapphire Crystal Multi Wire Sawing Equipment

Basic Info

Model NO.	SBT-QG-181518
Type	Multi Wire Sawing Machine
Usage	Jadestone, Magnet
Application	Stone Industry, Cutting Magnetic Materials, Ferrite, Sapphire Crys
Source Voltage	380V
Automation	Semi-automatic
Cutting Ability	High Speed
Control	Artificial
Certification	ISO, CE
Maximum Work-Piece Size	300*220*150mm
Cutting Wire Diameter	Diamond Wire: φ0.12-φ0.20mm
Cutting Accuracy	Plus - Minus0.01mm
The Most Thin Slice	0.25mm
Worktable Feed Stroke	up to 180mm
Transport Package	Non Wooden Case
Specification	length 1800* width 1500* height 1850 (mm)
Trademark	SUBIT
Origin	China
HS Code	8464109000
Production Capacity	50

Product Description

Multi wire sawing machine

Machine introduction:
This machine is mainly used for cutting magnetic materials, ferrite, sapphire crystal, artificial gemstone, monocrystalline silicon and other hard and brittle materials. It can be cut into pieces and can improve cutting precision, improve work efficiency, save raw materials and magnetic mud separate and recycle to reduce the workload of the next process.

Technical Parameters

Product name	Multi-wire sawing machine
Maximum work-piece size	300*220*150mm
Cutting wire diameter	diamond wire: φ0.12-φ0.20mm
Cutting accuracy	±0.01mm
The most thin slice	0.25mm
Worktable feed stroke	up to 180mm
Worktable feed speed	10mm/min
Line wheel storage capacity	20000 meters
Sand drum volume	150 (L)
Power / power consumption	3 phase - 380V / 12.5KVA
Host size	length 1800* width 1500* height 1850 (mm)
Machine weight	≈3800 (Kg)

Product advantages: The company's multi-wire sawing machine is a newly developed third-generation model, environmentally friendly and energy-saving, compact structure, adopting the new generation of vector fuzzy control technology and adaptive tuning, stable operation, and the line speed reaches the same type of Yaskawa servo model. The line speed of 800 per minute and above is widely used.The price of the whole machine is 30% lower than that of similar models. Our models are all factory direct sales, the most cost-effective and only one.It is equipped with a real-time magnetic mud separator to separate and recover the magnetic powder in the cutting fluid in real time. It does not need to be replaced during the grinding, so that the cutting fluid can be recycled many times. Ensure the cutting fluid concentration, stabilize the cutting efficiency, extend the life of the cutting fluid, and effectively recover the magnetic mud.Packing&Exporting:Non wooden case packed as below image shown:Outer size after packed:190*160*195CM/6.0CBMN.W/G.W:3800/4000KGAfter sale service:1.In the First year after purchased,factory provide product installation and maintenance for free.2.After one year, If on-site service is required, the buyer shall supply engineering personnel round-trip fares and accommodation expenses as well as the cost of spare parts required.

About us:Yutian County Changtong Electronics is located in Electronic Street, New Technology Industrial Park, Yutian County, Hebei Province. The company was founded in 1998 and has 10,000 square meters of land and 5,000 square meters of workshops . The company has introduced advanced production equipment and technology from Japan, South Korea, Taiwan and other places, and has cultivated a group of elites in R & D and design, specializing in the production of HC - 49U / S and SMD frequency films with a monthly output of 30 million. From grinding and cutting of crystal rough stones to frequency division after rot, strictly control the technology to ensure stable product performance and reliable quality. In 2001 , it was appraised as " high-tech enterprise " by the Science and Technology Commission of Hebei Province, China .Quality policy: scientific management, quality improvement, pioneering and innovative, and serving customers.Quality goals: 1. The chip utilization rate reaches 85% ; 2. The product ex-factory pass rate is 100% ; 3. The customer satisfaction rate is 100%.The company implements integrated management of supervision and control over the procurement of raw materials. The procurement of raw materials must be a first-class raw material with a silicon carbide content of more than 98.5% and a Mohs hardness of 9.2 ; the company's green silicon carbide fine powder has good wear resistance, high hardness, strong cutting ability, stable chemical properties, thermal conductivity and thermal expansion Many advantages, such as small coefficient, have been well received by customers in various industries, and the market share has gradually increased.We look forward to working with you to create a corporate image, build a corporate brand, establish a long-term and stable cooperative relationship, and achieve mutual benefit. Based on the principle of honesty, the company looks forward to working with colleagues to develop together and create the glory of the photovoltaic industry.