Distribution Transformer Production Line Side Seam Corrugated Fin Tank Forming and Automatic Welding Machine

Basic Info

Raw Material	St12/SPCC Cold-Rolled Shee
Material Thickness	1.0-1.5mm
Corrugated Fin Width	300-1600 mm
Corrugation Pitch Distance	40-80 mm
Any Ten Corrugation Pitch Distance Accum	2mm,
The Bottom of Corrugation Fin Diagonal T	3mm
Corrugation Fin Height	50-400 mm
Cavity Oil Gap	6 mm
Reinforcing Bars	8-10mm
Slider Adjustable Width	280-1620mm
Main Equipment Work Platform Height	900mm
Welding Gun Lift Stroke	430mm
Welding Speed	0.5-1m/Min
Protective Gas Flow	15L/Min
Compressed Air System Pressure	0.7MPa
Transport Package	Standard Packing
Specification	L9500 W4200 H2250mm
Trademark	Senerge
Origin	Zhejiang
Production Capacity	30 Sets/Month

Product Description

Automatic Welding Machine for Transformer Corrugated Fin
1.SummaryBH-2/400/1600 corrugated Fin Auto welding machine is special welding machine for transformer oil tank corrugated fin seam welding and reinforcing bar welding.Equipment is composed of three parts: feeding roller, main machine, discharge roller.Main machine include the base, two sets of symmetrical width adjustable slider, transfer device, positioning device, welding device, two sets of MIG welding machine, compressed air system and electric control system.Machine is easy to be operated, the operator adjust the slider according to corrugated fin width before operated and input the parameters into the touch screen, such as welding corrugated fin (height, Corrugation Pitch distance) and welding speed, welding form, etc. The operator put the corrugated fin into main machine from the feeding roller by manual, the sensor set up at the entrance of main equipment start to operate automatically after receiving the signal.

1. Main technical performance

2.1 Corrugated fin basic parametersRaw material: ST12/SPCC cold-rolled sheetMaterial thickness: 1.0-1.5mmCorrugated Fin form: front distance or back distance, horizontal or up-curved shape. Reinforced bars position is on the upside of the seam of corrugated fin. Corrugated fin width: 300-1600(±1)mmCorrugation Pitch distance:40-80(±0.25)mmAny ten Corrugation Pitch distance accumulative tolerance ≤±2mm, The bottom of Corrugation fin diagonal tolerance≤3mmCorrugation Fin height:50-400(±0.20)mmCavity oil gap: 6(±0.60)mmReinforcing bars: Φ8-Φ10Others: corrugated fin seam should be straight, tolerance of commissure ≤±0.10mm.Corrugated fin should be natural droop state in the length direction, the two terminal plane tolerance in length direction ≤±3mm.2.2 Machine basic parametersSlider adjustable width: 280-1620mmMain equipment work platform height: 900mmWelding gun lift stroke: 430mmWelding speed: 0.5-1m/minProtective gas type: 85%Ar+15%CO2Protective gas flow: 15L/minCompressed air system pressure: 0.7MpaTotal power: about 30kwWeight: about5000kgOverall dimension: about L9500*W4200*H2250mm